|
Quadrant EPP Nylatron® GF30, Type 66 |
|
Data provided by Quadrant Engineering Plastic Products
| Physical Properties | Metric | English | Comments | | | Specific Gravity | 1.29 g/cc | 0.0466 lb/in³ | ASTM D792 | | Water Absorption | 0.3 % | 0.3 % | Immersion, 24hr; ASTM D570(2) | | Water Absorption at Saturation | 5.5 % | 5.5 % | Immersion; ASTM D570(2) |
Mechanical Properties | | | Hardness, Rockwell M | 75 | 75 | ASTM D785 | | Tensile Strength, Ultimate | 93.1 MPa | 13500 psi | ASTM D638 | | Elongation at Break | 5 % | 5 % | ASTM D638 | | Tensile Modulus | 4.65 GPa | 675 ksi | ASTM D638 | | Flexural Modulus | 4.48 GPa | 650 ksi | ASTM D790 | | Flexural Yield Strength | 145 MPa | 21000 psi | ASTM D790 | | Compressive Strength | 124 MPa | 18000 psi | 10% Def.; ASTM D695 | | Compressive Modulus | 4.14 GPa | 600 ksi | ASTM D695 |
Electrical Properties | | | Dielectric Strength | 13.8 kV/mm | 350 V/mil | Short Term; ASTM D149 |
Thermal Properties | | | CTE, linear 68°F | 36 µm/m-°C | 20 µin/in-°F | (-40°F to 300°F); ASTM E831 | | Thermal Conductivity | 0.245 W/m-K | 1.7 BTU-in/hr-ft²-°F | ASTM F433 | | Melting Point | 260 °C | 500 °F | Crystalline, Peak; ASTM D3418 | | Maximum Service Temperature, Air | 104 °C | 220 °F | Long Term | | Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 400 °F | ASTM D648 | | Flammability, UL94 (Estimated Rating) | V-2 | V-2 | 1/8 inch |
Qualitative Processing Properties | | | Compliance - FDA | Not Compliant | | | Machinability | 4 | 1-10, 1=Easier to Machine | | Service in Alcohols | Limited | | | Service in Aliphatic Hydrocarbons | Acceptable | | | Service in Aromatic Hydrocarbons | Acceptable | | | Service in Chlorinated Solvents | Limited | | | Service in Ethers | Acceptable | | | Service in Ketones | Acceptable | | | Service in Strong Acids | Unacceptable | | | Service in Strong Alkalies | Unacceptable | | | Service in Sunlight | Limited | | | Service in Weak Acids | Limited | | | Service in Weak Alkalies | Limited | |
|
