What is Polybenzimidazole (PBI)?(Post)

    What is Polybenzimidazole | Laird Plastics (PBI)? Polybenzimidazole is the best engineering thermoplastic on the market. It has the strongest heat resistance and mechanical property retention of ...

    ​What is Polyethylene?(Post)

    What is Polyethylene? Polyethylene is a thermoplastic polymer with a changeable crystalline structure and, depending on the kind, a wide variety of uses. With tens of millions of tons manufacture ...

    What is Polycarbonate?(Post)

    What is Polycarbonate? Polycarbonate plastics, usually known as PC plastics, are a kind of amorphous thermoplastic that is inherently transparent or mostly clear. Even though they are commerciall ...

    What is HDPE Plastic? (High-Density Polyethylene) (Post)

    Introduction You use plastic every single day. There are obvious uses of plastic, such as a bottle of water, the glasses on your face, the case on your phone, or the container that holds your f ...

    What is PBT Plastics? (Polybutylene terephthalate)(Post)

    WHAT IS PBT PLASTIC? Companies across the planet continue to look for ways to innovate and save money. One way of doing this is to use materials and components that weigh and cost less. This is w ...

    What is PETG (Polyethylene Terephthalate Glycol) (Post)

    What is PETG PETG or Polyethylene terephthalate glycol is a thermoplastic polyester commonly used in manufacturing. The PET component is what is commonly found in plastic beverage bottles and foo ...

  • Polycarbonate - Rod

    Polycarbonate - Rod

    Polycarbonate - RodPolycarbonate rod, manufactured to machine grade specifications, is a semi-transparent, extremely impact-resistant, electrically excellent thermoplastic. Its low moisture...
    $205.00
  • Chlorinated Polyvinyl Chloride (CPVC)

    Chlorinated Polyvinyl Chloride (CPVC)

    Chlorinated Polyvinyl Chloride (CPVC) Chlorinated Polyvinyl Chloride (CPVC) is a high temperature thermoplastic. CPVC differs from PVC in that CPVC is a PVC homopolymer that has been subjected to a...
    $5,600.00
  • HDPE - Cutting Board

    HDPE - Cutting Board

    HDPE - Cutting BoardHDPE (High Density Polyethylene) HDPE Cutting Board sheets, which have a pebble like texture finish. HDPE Sheets have good impact strength with excellent resistance to chemicals...
    $253.00 - $1,023.00
  • Polypropylene (PP) Polypropylene (PP)

    Polypropylene (PP)

    Polypropylene offers a good balance of thermal, chemical and electrical properties with moderate strength. Polypropylene sheet offers good impact resistance, considerable thermal...
    $32.00 - $287.50
  • Polycarbonate (PC) Polycarbonate (PC)
    General Purpose

    Polycarbonate (PC)

    Expanded PVC FoamPolycarbonate is a transparent thermoplastic engineering plastic that is tough and heat resistant. It's ideal for applications such as structural glazing, machine guards and signs...
    $4.77 - $847.39
  • Polycarbonate Sign Grade Reel/ Roll

    Polycarbonate Sign Grade Reel/ Roll

    Polycarbonate Sign Grade Reel/ RollPolycarbonate Reel/ Rolls combines the superior toughness of polycarbonate with exceptional UV resistance. Highly resistant to discoloration, surface haze...
    $7,005.00
  • Polyethylene Print Film

    Polyethylene Print Film

    Polyethylene is a lightweight, durable thermoplastic with variable crystalline structure. It is one of the most widely produced plastics in the world (tens of millions of tons are produced worldwide...
    $5.20
  • UHMW Polyethylene Rods UHMW Polyethylene Rods

    UHMW Polyethylene Rods

    UHMW Polyethylene RodsUHMW, also known as UHMW-PE (Ultra High Molecular Weight Polyethylene). It is categorized as an engineering material, and offers a unique combination of wear and corrosion...
    $219.36
  • High density polyethylene (HDPE)

    High density polyethylene (HDPE)

    HDPEHigh density polyethylene (HDPE) is a strong, durable, lightweight, and chemically resistant plastic material popular for a variety of applications. HDPE is used in a variety of applications and...
    $20.44 - $356.76
  • Polyamide Rods (PAI)

    Polyamide Rods (PAI)

    Polyamide (PAI) RodPolyamide is commonly called Nylon and is the major engineering thermoplastics class. Polyamides are among the most important and useful materials due to their outstanding wear...
    $165.00
  • Polycarbonate Pattern

    Polycarbonate Pattern

    Polycarbonate PatternPolycarbonate is a transparent thermoplastic engineering plastic that is tough and heat resistant. It's ideal for applications such as structural glazing, machine guards and...
    $350.00
  • Polyester (PET) Rods

    Polyester (PET) Rods

    Polyester (PET) - RodsPET (Polyethylene terephthalate) is a general purpose thermoplastic polymer which belongs to the polyester family of polymers. PET is the most recycled thermoplastics. PET is a...
    $55.00
  • Polyvinylidene Fluoride (PVDF)

    Polyvinylidene Fluoride (PVDF)

    Polyvinylidene Fluoride (PVDF)PVDF is a highly non-reactive thermoplastic fluoropolymer produced by the polymerization of vinylidene difluoride. It is used generally in applications requiring the...
    $50.00 - $65.00
  • Polyphenylene Oxide (PPO) - Noryl®

    Polyphenylene Oxide (PPO) - Noryl®

    Polyphenylene Oxide (PPO) - Noryl®Due to its inherent chemical composition, Noryl® exhibits unusually low moisture absorption, providing excellent insulating properties and dimensional stability over...
    $350.00 - $815.00
  • Polyether Ether Ketone Rod (PEEK Rod)

    Polyether Ether Ketone Rod (PEEK Rod)

    Polyether Ether Ketone Rod (PEEK Rod)PEEK (polyetheretheketone) is a high performance engineering plastic. PEEK is known for excellent mechanical strength and dimensional stability. Aerospace,...
    $150.00 - $500.00
  • Polyphenylene Oxide Rod (PPO Rod) - Noryl®

    Polyphenylene Oxide Rod (PPO Rod) - Noryl®

    Polyphenylene Oxide Rod (PPO Rod) - Noryl®Due to its inherent chemical composition, Noryl® exhibits unusually low moisture absorption, providing excellent insulating properties and dimensional...
    $48.00
  • Fluted Polypropylene Fluted Polypropylene

    Fluted Polypropylene

    Fluted Polypropylene is tougher than corrugated fibreboard and lighter than extruded plastic sheets, making it ideal for both indoor and outdoor uses. Fluted Polypropylene's excellent adhesion...
    $2.25 - $75.02
  • PEI - POLYETHER IMIDE - Ultem® 1000

    PEI - POLYETHER IMIDE - Ultem® 1000

    PEI - POLYETHER IMIDE - Ultem® 1000Ultem® 1000 is a thermoplastic polyetherimide high heat polymer designed for injection molding processing. Through the development of new extrusion technology,...
    $35.00 - $215.00
  • Twin Wall Polycarbonate Sheets

    Twin Wall Polycarbonate Sheets

    Polycarbonate - Twin WallPolycarbonate is a transparent thermoplastic engineering plastic that is tough and heat resistant. Polycarbonate sheet and Multiwall Polycarbonate sheet are both used in...
    $150.00 - $205.00
  • Precision High Density Urethane Board - HDU
    Coastal Enterprises

    Precision High Density Urethane Board - HDU

    Precision High Density Urethane Board (PBLT) from Coastal Enterprises is a “closed cell” rigid polyurethane product made specifically for applications of up to 200° F continuous exposure. Precision...
    $450.00 - $1,400.00
  • Clear Extruded Acrylic -  OPTIX®
    Plaskolite

    Clear Extruded Acrylic - OPTIX®

    OPTIX® Acrylic - crystal clear, impact- and weather-resistant, OPTIX is a continuously processed, high quality acrylic sheet. High molecular weight makes OPTIX ideal for almost any type of...
    $106.00 - $260.00
  • Pattern P95 Acrylic
    General Purpose

    Pattern P95 Acrylic

    Pattern 95 is a constantly processed, matte-finished acrylic sheet that both decorates and reduces surface glare. The matte finish is resistant to fingerprints and smudges, and it does not absorb...
    $250.00 - $365.00
  • Black Extruded Acrylic Black Extruded Acrylic

    Black Extruded Acrylic

    Extruded acrylic is an economical, high quality material with a narrow thickness tolerance and optical clarity, allowing for a broad range of design options that allow you the flexibility needed in...
    $7.23 - $259.93
  • Brand logo for general formations
    General Formulations

    GF 230 AUTOMARK™ Premium Vinyl Gloss White

    GF 230 AUTOMARK™GF 230 is a Premium 2.4 mil calendered Gloss white vinyl is a digital media material with a grey permanent repositionable acrylic adhesive on an air-egress liner. Made by General...
    $470.00
  • Acetal Sheet

    Acetal Sheet

    Acetal Sheet Acetal Sheets is a custom-made, industrial-strength thermoplastic material that was created to replace metal in many applications. Unlike other plastics, it is a superior, custom-made...
    $168.00 - $460.00
  • Acrylic/PVC - KYDEX® T
    Sekisui

    Acrylic/PVC - KYDEX® T

    KYDEX® T Acrylic/ PVC Thermoplastic Sheet KYDEX® T is a proprietary thermoplastic sheet that is cost-competitive with fire retardant ABS/PVC (FR-ABS) formulations but with significantly...
    $200.00 - $835.00
  • LDPE

    LDPE

    HDPELDPE is a versatile, lightweight, and flexible plastic that is easy to fabricate and form. It has good chemical and impact resistance and is used in the manufacture of a wide range of products,...
    $85.00 - $155.00
  • Styrene Plastic Sheets (HIPS)
    Primex

    Styrene Plastic Sheets (HIPS)

    Styrene ( HIPS)Styrene is a versatile sheet and can used for several applications including, printing, painting and silk screening. Styrene has excellent vacuum forming properties and low temperature...
    $20.95 - $61.22
  • Styrene (HIPS) - Dead White
    Primex

    Styrene (HIPS) - Dead White

    Styrene (HIPS) - Dead WhiteDead White Styrene is completey opaque sheet. Styrene is a versatile sheet and can used for several applications including, printing, painting and silk screening. Styrene...
    $24.25 - $73.33
  • Styrene (HIPS) - Translucent
    Primex

    Styrene (HIPS) - Translucent

    Styrene (HIPS) - TranslucentStyrene has excellent vacuum forming properties and low temperature properties that make it an ideal option for printing, painting and silk screening. It cuts extremely...
    $16.85

Looking for something specific? Contact us for a customized quote